CRYO + CAVI + RF3 in 1 fat freezing body shaping sliiming machine
Description
1. Cellulite reduction,skin tightening
2 Freeze handles working at the same time.
3.4 Handles: 2 fat freeze, cavitation, RF
Working Theory
1. Cryolipolysis
Cryolipolysisis a non-invasive (without contact) procedure in which doctors
place a small suction cup on a patient's skin. The device gradually
extracts body heat until the subcutaneous fat is frozen.
During the procedure, the applicator delivers precisely controlled
cooling conditions that have been proven to target and eliminate
fat cells in specific areas of the body. When fat cells are exposed
to precise cooling, they trigger a process of natural removal that
gradually reduces the thickness of the fat layer.
Fat cells, according to researchers at Harvard Medical School, are
very sensitive to cold. They discovered that intense, localized
freezing killed adipocytes - the cells involved in forming fat
tissue. Therefore, cold destroys fat by damaging the cells: they
gradually die and are then naturally metabolized by lymphatic
system.
The cryolipolysis system controls the rate of energy extraction or
cooling during the procedure. The result is a reduction in fat
bulges that is visible in most patients in two to four months. The
fat cells in the treated area are gradually eliminated through the
body's normal metabolic processes.
The only drawback of cryotherapy treatments is that you can't see
the results immediately. It will take a few months for the entire
process to be completed, including metabolizing dead fat cells. The
procedure itself will last about an hour.
2. Cavitation
Ultrasonic cavitation slimming instrument (ultraound liposuction) adopts the latest
scientific and technology can be effective treatment for stubborn
cellulite and orange peel fat. An ultrasonic cavitation generator
is based on the resonance of pressure waves in continuous
transmission. This produces micro-bubbles that implode adipose
cells, destroying and processing of fat in a liquid substance,
which will be eliminated by the lymphatic system, urinary and
faecal route. This makes one believe that corporal remodeling,
because it redistributes the body cells that have not been
destroyed. So cavitation is effective to dissolve fat, improve
cellulite tissues, tighten skin, enhance skin elasticity and so on.
3. RF
Clinical practice has proved that RF can effectively compact and regenerate skin. Using the unique
deep-heating technology (radio frequency plasma technology), it can
active the deep collagen and promote new growing of collagen, to
fill collagen contraction and vacancy loss, thus to tighten skin
and recover skin elasticity.
Features
1. Suitable treatments :All kind of skin
2. 2 fat freeze handles can be work together or separatly.
3. 8.4'' LCD Touch Screen, beautiful and easy operation.
4. Japanese Top-level Cooling plate, ensure steady cooling, good
effect, long life.
5. 24hours working without stop.
Applicatons
1. Redundant cellulites exploded and melted;
2. Body slimming and weight reduction;
3. Face thinner and skin tightening;
4. Body shaping and contouring;
5. To promote and accelerate the body's metabolism.
Parameters
| Output Power: | 1000W |
| Display: | 8.4inch color touch screen |
| Language: | English |
| Dimension | 59*35*112.5cm |
| N.W: | 40kg |
| Package: | Aluminium box |
| Handpiece: | 5 pcs Handpiece |
| H1: Big fat freeze handle 18*8*6.8cm |
| H2: Small fat freeze handle 15*6.3*5cm |
| H3: Multipolar RF |
| H4: Cavitation |
| Pressure: | 400KPA |
| Temperature: | -10~5degree |
| Cooling system: | Wind+water+semiconductor |
| Working Time: | No downtime |
| Cavitation | Frequency: | 40 KHz |
| Energy: | 1~50 W/cm2 |
| Mode | Pulse |
| Head Diameter | 50 mm |
| Multipolar RF | Frequency: | 6 MHz |
| Energy: | 1~50 J/cm2 |
| Head Diameter: | 50 mm |
Treatment result
Safety of LVD and EMC
1. Keep all panels and covers close, as is dangerous to open them.
2. It exists the high voltage dangers, and even some parts still
have electricity storage after breaking off from electricity. Thus
any other person is not allowed to open the machine except engineer
from our company.
3. In process of maintenance, the machine shall be in charged by
the specific person and be conformed of the power off and the
covers closed.
4. This machine is 30KG, which may cause personal injury if moving
without proper way. This machine has enough balance quality that is
movable, however, move it slowly and carefully,.
5. In the three-pin power cord, the ground wire is proper
grounding, which is very important point for safety operation.
Suggested parameter setting according to Chinese patients.
| Cryolipolysis (parameter from weak to strong) |
| Parameter type | Set temp | Work time | suction | release |
| Range | -10℃-5℃ | 0-60 | 0.5-8 | 0-4 |
| Suggested setting | -2℃ | 20 mins | 3 | 1.5 |
| Treatment course | 2-3 times treatment. One month interval |
| Please do below treatments after 1 week of Cryolipolysis therapy |
| Cavitation (parameter from weak to strong) |
| Parameter type | Intense (w/cm2) | Mode | Time(min) | |
| Range | 0-10 |
| 0-60 | |
|
|
| Suggested setting | 4 | | 15 | |
| Treatment course | 5-7 times treatment. One week interval |
| RF(parameter from weak to strong) |
| Parameter type | Intensity (w/cm2) | timer | | |
| Range | 0-10 | 0-60 | | |
| Suggested setting | 4 | 15 | | |
| Treatment course | 5-8 times treatment, one week interval |
Quick details
| Manufacturer | Yes, since 2005 |
| OEM&ODM | Yes, we have a professional research & development group of 50
people |
| Clinic training | Offer |
| After – sales service | Offer |
| Type | Stationary |
| Brand name | US |
| Place of Origin | Beijing China (Mainland) |
| Packaging Detail | Aluminum alloy case |
| Transportation | By express (DHL, EMS, UOS, TNT, Fedex); |
| By air express to air port; |
| By sea |
| Delivery Detail | 3-7 days |
| Payment Method | T/T, WESTERN UNION, MONEY GRAM, ESCROW, PAYPAL… |
About Us:
Beijing Globalipl Development Co., Ltd is a high-tech company
engaged in developing, research, production, sale and after-sale.
With the customer-orientated business philosophy and the purpose of
science and technology first, ensure high quality and
cost-effective products for customers; Which makes us gains lots of
customers all over the world. Globalipl company works hard at all
times, is to became a famous international OEM/ODM manufacturer of
all aesthetic & medical equipments in the world.
We took part in world-renowned exhibitions each year, such as hold
in Moscow, Japan, Italy, Germany, Dubai, Hong Kong etc
Contact USTelephone:86-13439681376Mobile phone:86-13439681376
Website:www.globalipl.com
